NS50 wireless network switch
User Manual
Revision C
Chapter 5: Configuration Using the Web Interface
5.1 Logging onto the Web Browser Interface
The web browser interface has a login front screen with access at two levels:
ADMIN — Allows settings to be viewed and modified. The default password is ‘admin’.
USER — Allows settings to be viewed but not modified. By default there is no password.
NOTE:
Login and configuration needs to be carried out for each WAC fitted to the wireless
network device. Each WAC has a unique MAC address and should be configured with a
unique IP address.
By default, the NS50 is configured to use DHCP. To find the IP address of a newly
connected device, use the MST Device Scanner.
Devices running firmware 2.24.0 or earlier may default to 192.168.1.90.
To log in to the web browser interface:
1. Launch your web browser and enter http://<WAC IP address> in the address field.
2. The login screen is displayed.
3. In the LOGIN dialog box, select Admin from the User Name drop-down box, and type the
password in the Password field. The factory default password is admin.
4. Click Log In. The Wireless Radio Settings screen will be displayed.