MST Impact NS5001 User Manual

NS50 wireless network switch
User Manual
Revision C
Chapter 5: Configuration Using the Web Interface
© 2012 MST Global
Commercial in Confidence
61
present, the ICA only uses this protocol to monitor for Port Up/Port Down errors on the NS50, and is not
affected by the settings below.
The following settings are available, which may affect 3rd party SNMP tools:
 Name: The name or ID of the device
 Contact: The name of the person to be notified of any alarms
 Location: The location of the device
 Community String: The group to which the device belongs. Unless otherwise necessary, this is usually
left as public.
5.5.3 Setting Up the LAN
The LAN configuration screen is shown in Figure 29: LAN configuration screen.

MST Impact NS5001 Specifications

General

Brand	MST
Model	Impact NS5001
Category	Switch
Language	English