SECTION 12.0 - DISPOSAL
12.1 General
If the milk cooler and controls are removed from the installation site, ensure the materials, refrigerants,
and chemicals are handled and/or disposed of according to applicable codes and regulations.
12.2 Chemical Disposal
All detergents, acids, sanitizers, refrigerants, and oils can be harmful and toxic to the environment if
not properly disposed of. Consult each chemical label and comply with all local environmental
regulations and agencies.
12.3 Solid Component Disposal
The milk cooler’s basic components consist of steel, copper, rubber, and plastics which may be
separated and recycled. The “CFC-Free” foam insulation should be disposed of according to local
environmental regulations and agencies.
Sentry II with Auto-Dosing Assembly Operating Instructions 75 Effective April 1, 2000
To Next Page
Loading...
