Mueller SENTRY II User Manual

6.3 Sentry II Service Reference Form, Programmable Features
Please complete for future service reference:
Mueller Authorized Dealer: End User/Owner:
Name: Name:
Address: Address:
Phone: Phone:
Contact: Contact:
Please check the selected program options:
Description: Options and Selection
Bottom Unit(s) Cooling Delay 0-120 minutes ________ minutes
All Units Cooling Delay 0-120 minutes ________ minutes
Pre-Start Cooling ______ 30 minutes ______ 60 minutes
Pre-Start Agitation ______ 30 minutes ______ 60 minutes
Interval Agitation ______ 3 out of 18 min. ______ 3 out of 30 min.
Sample Agitation ______ 2 minutes ______ 5 minutes ______ 10 minutes
Pre-Rinse Temperature ______ Cold ______ Warm
Fifth-Cycle for Complete Wash ______ On ______ Off ______ n/a Japan Program
Fifth-Cycle (Acid or Sanitize) ______ Acid ______ Sanitize ______ n/a Japan Program
Acid/Sanitize Temperature* ______ Cold ______ Warm
Delayed Start - Complete Wash ______ None ______ 45 minutes
*Selects sanitize temperature only with Japan program.
Sentry Information: Milk Cooler Information:
Part Number/Model: Part Number/Model:
Serial Number: Serial Number:
Comments:
Sentry II with Auto-Dosing Assembly Operating Instructions 51 Effective April 1, 2000

Mueller SENTRY II Specifications

General

Brand	Mueller
Model	SENTRY II
Category	Controller
Language	English