multicomp pro MP Series User Manual

Multicomp-Pro
108
Connect with APP as Wi-Fi Station
(1) In the oscilloscope, click the icon, click Utility. Select Function in the
bottom menu. Select LAN Set in the left menu. In the bottom menu, set the
Type item as WIFI-STA, and select Set in the bottom menu.
(2) In the right menu, select SSID, a keyboard will pop up. Touch the keyboard to
input the name of the Wi-Fi hotspot.
(3) In the right menu, select Encryption, push to set the Encryption type of the
Wi-Fi hotspot. Open type needs no password. WEP or WPA type need to input
the password. In the right menu, select Password, use the keyboard to input
the Wi-Fi hotspot password.
(4) In the right menu, select IP:PORT, click or to set the PORT.
(5) After setting, select ON in the Status menu. The value of IP is displayed in
IP:PORT menu. A changing icon appears on the top right of the screen.
(6) Select Save set in the bottom menu to save current settings.
(7) In Android device, enter the Wi-Fi settings, select the oscilloscope access point
to connect, enter the set password.

multicomp pro MP Series Specifications

General

Brand	multicomp pro
Model	MP Series
Category	Diagnostic Equipment
Language	English