Muratec MFX-1820 - Replacing the Stamp

37
Getting Started
Replacing the stamp
If the stamp ink becomes light, replace the stamp as follows:
Automatic Document Feeder (ADF)
1
2
3
4
5
Reverse Automatic Document Feeder (RADF)
Using tweezers, remove the used stamp and then insert the new stamp.
If the stamp is floating, a jam can occur. Be sure to push in the stamp until it clicks.
IMPORTANT
•Donotdirectlytouchthestampsurface.Iftheinkadherestoyourhands,washwithwaterimmediately.
•UsestampsdesignedforuseinMuratecmachines.