Muratec MFX-1820 - Page 87

87
System Settings
Setting item
First level
Setting item
Second level
Setting item
Third level
Description Settings
Reference in
the User’s
Guide
Copy Settings Default Set-
tings
Contrast You can set the default contrast for scan-
ning.
Lightest
•(Lighter)
Normal
•(Darker)
Darkest
6-4
Zoom You can set the default magnification for
copying.
Auto
100%
Sort You can set the default for sorting. Off
On
Mix Copy You can set the default for Mix Copy. Off
On
Next Doc You can make different default next
document settings for the ADF and the
document glass.
(Only settings for the document glass are
possible when an ADF is not fitted.)
•ADF
On
Off
•FBS
On
Off
Copy Reserva-
tion
– If you set this to ON, you can scan the
next document during copying.
On
Off
6-5
Fax Settings Default Set-
tings
Resolution You can set the default resolution for
scanning.
Normal
Fine
S-Fine
Photo
Background
6-14
Contrast You can set the default contrast for scan-
ning.
Lightest
•(Lighter)
Normal
•(Darker)
Darkest
TTI If you set this to ON, sender information
(TTI) is added to the sent document.
On
Off
Memory Tx If you set this to ON, documents are first
scanned into memory and then sent.
If you set this to OFF, the documents
are sent in real-time, that is, as they are
scanned.
(This item appears only when the ma-
chine is fitted with an ADF.)
On
Off
Tx Report If you set this to ON, a “Tx Report” is
printed after each transmission.
On
Off
Stamp If you set this to ON, documents that
have been scanned using the ADF are
stamped.
(This item appears only when the ma-
chine is fitted with an ADF.)
On
Off
Next Doc You can make different default next
document settings for the ADF and the
document glass.
(Only settings for the document glass are
possible when an ADF is not fitted.)
•ADF
On
Off
•FBS
On
Off