Windows Utilities
- 106 -
2 Select the [User Setting] tab.
3 Click on [PIN Manager].
4 Enter the administrator password and
click [OK].
5 Click .
6 Select the checkbox for the PIN you want
to delete.
7 Click .
8 On the confirmation screen, click on
[Yes].
9 Click .
Exports the PIN to a file.
1
Select machine from which to export,
from the [Registered Device Table].
2 Select the [User Setting] tab.
3 Click on [PIN Manager].
4 Enter the administrator password and
click [OK].
5 Click .
6 Click .
7 Enter the file name, select the folder to
save the file to, and click [Save].
Note
After exporting, the edited CSV file may not restore
properly.
Imports PINs from a file.
1
Select machine from which to import,
from [Registered Device Table].
2 Select the [User Setting] tab.
3 Click on [PIN Manager].
4 Enter the administrator password and
click [OK].
5 Click .
6 Click .
7 Select the file you want to import and
click on [Open].
8 Select the settings to import and click
[Import].
9 Click .
Creating a New User
1
Select the machine from the
[Registered Device Table].
2 Select the [User Setting] tab.
3 Click on [PIN Manager].
4 Enter the administrator password and
click [OK].
5 Click .
6 Enter username and password.
7 Select either an existing PIN from [PIN
Number], or select [Create New].
8 When selecting [Create New], enter the
PIN number into [New PIN Number],
set each value as required, and click
[OK].
9 Click [Close].
10 Click .
Memo
"Admin" cannot be registered as a new username.
Changing User Settings
1
Select the machine from the
[Registered Device Table].
2 Select the [User Setting] tab.
3 Click on [PIN Manager].
4 Enter the administrator password and
click [OK].
5 Select username to change.
6 Change settings as required and click on
[OK].
7 Click .
Deleting Users
1
Select the machine from the
[Registered Device Table].
2 Select the [User Setting] tab.
3 Click on [PIN Manager].
4 Enter the administrator password and
click [OK].
To Next Page
Loading...
Need help?
General
