List of the Device Setting Menu Items
- 80 -
Admin Setup
In the following menu, you can change the settings that need the administrator authority.
Memo
To enter the [Admin Setup] menu, an administrator password is necessary. The default password is "aaaaaa".
If you change the default setting from the [Admin Setup] menu, and want to reflect the changed default on the start screen
immediately, press <RESET/LOG OUT> key or press the function switch key which is any of <Copy>, <Scan>, <Print> and
<FAX/HOOK>.
Copy Setup
Authentication
method
Sets the authentication method.
SMTP Auth User Name Sets the user ID for the SMTP authentication. Maximum
64 characters.
Password Sets the password for the SMTP authentication. Maxi-
mum 64 characters.
POP before
SMTP
POP3 Server Sets the IP address or the host name for the POP3 server.
Maximum 64 characters.
User Name Sets a user ID for the POP authentication. Maximum 64
characters.
Password Sets a password for the POP3 authentication. Maximum
16 characters.
"Copy Setup" "Fax Setup" "Internet Fax Setup"
"Scanner Setup" "Print From USB Memory Setup" "Print Setup"
"Network Menu" "Management" "User Install"
Item
Factory
Default
Description
Default
Settings
Scan Size A4 or Letter Sets the default scan size.
Duplex Copy
OFF (Do not
do both sides)
Sets the duplex (2-sided) function off or
on.
Zoom 100% Sets the default zoom ratio.
Sort ON Sets whether to collate copied documents
by default.
Image Settings Density 0 Sets the default density of images.
Document Type Text/Photo Sets the default print quality when scan-
ning documents.
Resolution Normal Sets the default setting of resolution.
Background Removal 3 Sets the default setup of the background
removal.
Contrast 0 Sets the default setting of contrast.
Direction Portrait Selects the default page orientation of
documents.
ID Card Copy OFF Sets whether to use the ID card copy
mode by default.
Continue Scan OFF Sets whether to use the continuous scan
mode.
Item Description
To Next Page
Loading...
Need help?
General
