Muratec MFX-3091 User Manual

Useful Functions for Scanning to Local and Remote PCs
- 46 -
 Useful Functions for Scanning to Local and
Remote PCs
This section explains useful functions for scanning to local and remote PCs.
Memo
 To enter the [Admin Setup] menu, a password is necessary. The default password is "aaaaaa".
Setting PC Scan Mode
You can select either simple scan mode or secure
scan mode for scanning to local PC function.
1 Press the <SETTING> key.
2 Press the to select [Admin Setup]
and then press .
3 Enter the administrator password.
4 Select [Enter] and then press .
5 Press the to select [Scanner Setup]
and then press .
6 Press the to select [TWAIN Setup]
and then press .
7 Press the to select [PC Scan Mode]
and then press .
8 Press the to select a mode and then
press .
9 Press the until the top screen appears.
Enabling the Network TWAIN
Settings
Do the following procedure to use scan to the
local PC and scan to remote PC functions
connecting to network.
Note
 If you select [Disable] on this function, you cannot use
scan to local PC and scan to remote PC via network.
1 Press the <SETTING> key.
2 Press the to select [Admin Setup]
and then press .
3 Enter the administrator password.
4 Select [Enter] and then press .
5 Press the to select [Scanner Setup]
and then press .
6 Press the to select [TWAIN Setup]
and then press .
7 Check that [Network TWAIN] is
selected and then press .
8 Press the to select [ON] and then
press .
9 Press the until the top screen appears.
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK

Muratec MFX-3091 Specifications

General

Brand	Muratec
Model	MFX-3091
Category	All in One Printer
Language	English