Muratec MFX-3091 User Manual

List of the Device Setting Menu Items
- 78 -
Store Document Settings
View Information
Item Description
Store Fcode Bulletin
board
Over Write Stores documents in a bulletin box.
Delete Fcode Bulletin board Deletes accumulated documents.
Print Fcode Box Prints accumulated document in Fcode
Confidential Box.
Received Documents Prints accumulated documents in memory.
Item Description
System
information
Serial No. Indicates the serial number of the machine.
Asset No. Indicates the asset number of the machine.
Lot No. Indicates the production lot number of the machine.
CU Version Indicates the version number of the control unit firmware.
PU Version Indicates the version number of the print unit firmware.
Scanner Version Indicates the version number of the scanner firmware.
Panel Version Indicates the version number of the panel firmware.
Total Memory Indicates the total capacity of all RAMs installed.
Flash Memory Indicates the total capacities of all flash memories.
Network IPv4 address Indicates the IPv4 address of the machine.
Display condition: [Admin Setup]>[Network Menu]>[Network
Setup]>[TCP/IP] is set to [Enable] and [IP Version] is not set to
[IPv6].
Subnet Mask Indicates the subnet mask of the machine.
Display condition: [Admin Setup]>[Network Menu]>[Network
Setup]>[TCP/IP] is set to [Enable] and [IP Version] is not set to
[IPv6].
Gateway Address Indicates the gateway address of the machine.
Display condition: [Admin Setup]>[Network Menu]>[Network
Setup]>[TCP/IP] is set to [Enable] and [IP Version] is not set to
[IPv6].
MAC Address Indicates the MAC address of the machine.
NIC Program Ver-
sion
Indicates the version number of the network firmware.
IPv6 Address
(Local)
Indicates the IPv6 address of the machine.
Display condition: [Admin Setup]>[Network Menu]>[Network
Setup]>[TCP/IP] is set to [Enable] and [IP Version] is not set to
[IPv4].
IPv6 Address
(Global)
Indicates the IPv6 address of the machine.
Display condition: [Admin Setup]>[Network Menu]>[Network
Setup]>[TCP/IP] is set to [Enable] and [IP Version] is not set to
[IPv4].

Muratec MFX-3091 Specifications

General

Brand	Muratec
Model	MFX-3091
Category	All in One Printer
Language	English