Muratec MFX-3091 User Manual

Useful Operations for Transmission
- 16 -
13 When all the documents are scanned,
press the to select [Scan Complete]
and then press .
Reference
 For details on how to stop scanning and to cancel
transmission, refer to the User's Manual Basic.
Changing the Sender Name
You can specify the sender name to be printed on
faxes you send. You must register a Sender
name in advance.
Reference
 Check that [Sender name] is enabled before using the
following functions. For details, refer to the User's Manual
Basic.
 Registering a Sender Name
You can register up to three sender names.
Memo
 In the initial fax settings described in the User's Manual
Basic, you specify [Sender ID], which is automatically
registered to [Sender name 1].
1 Press the <SETTING> key.
2 Press the to select [Admin Setup]
and then press .
3 Enter the administrator password.
4 Select [Enter] and then press .
5 Press the to select [User Install] and
then press .
6 Press the to select [TTI Register/
Edit] and then press .
7 Press the to select a sender's number
and then press .
8 Enter a name up to 22 characters.
9 Select [Enter] and then press .
10 Press the until the start screen appears.
 Changing the Sender Name Printed
on a Fax
By default, the standard sender name is printed
on faxes when you enable [Sender Name]. To
use a sender name other than the standard
sender name, perform the following procedure.
1 Press the <FAX/HOOK> key.
2 Check that [Fax] is selected and then
press to open the fax start screen.
3 Press the to select [Fax Functions]
and then press .
4 Press the to select [TTI Select] and
then press .
5 Press the to select a sender name you
wan to use and then press .
6 Press the until the fax standby screen
appears.
 Changing the Standard Sender
Name
If you use a sender name frequently, we
recommend to specify it as the standard sender
name.
Memo
 In the initial fax settings described in the User's Manual
Basic, you specify [Sender ID]. By default, this value is
used as the standard sender name.
1 Press the <SETTING> key.
2 Press the to select [Admin Setup]
and then press .
3 Enter the administrator password.
4 Select [Enter] and then press .
5 Press the to select [User Install] and
then press .
6 Press the to select [Standard TTI]
and then press .
7 Press the to select a name you want
to use and then press .
8 Press the until the start screen
appears.
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK

Muratec MFX-3091 Specifications

General

Brand	Muratec
Model	MFX-3091
Category	All in One Printer
Language	English