List of the Device Setting Menu Items
- 71 -
Configuring at the Operator Panel
5
List of the Device Setting Menu Items
This section explains the configuration of the equipment setting menu.
Note
Factory default setting values are different according to the region where the machine is used.
Device Setting Menu
List of Each Setup Menu
Reports
Items Description Reference
Reports Prints reports. page 71
Paper Setup Performs the paper settings of trays. page 72
Address book Creates or edits an address book. page 73
Phone book Creates or edits a phone book. page 74
Profile Creates or edits a profile. page 75
Network Scan Destination Sets a destination of the network scan. page 77
Store Document Settings Performs the storing setting of scanned document data. page 78
View Information Checks the machine information. page 78
Easy Setup Performs Easy Setup. To enter this menu, the admin password is
required.
page 79
Admin Setup Performs Admin Setup. To enter this menu, the admin password is
required.
page 80
Item Description
Configuration Prints the configuration details of the machine.
System File List Prints a file list.
Demo Page Prints a demo page.
Error Log Prints an error log.
Scan To Log Prints the results of the jobs of Scan to E-mail, Scan to
Network PC, or Scan to USB Memory. Display condition:
[Admin Setup]>[Device Management]>[Job Log
Setup]>[Save Job Log] is set to [Enable].
MFP Usage Copies Prints the total of the job logs. Specifies the number of
pages to print in the [Copies] screen.
Network Information Prints general information on the network.
Fax Speed Dial List Prints the list of the fax numbers registered for speed
dials.
Group List Prints the list of the fax numbers registered under groups.
Fax Tx/Rx Log Prints the list of the communication results of the latest
50 fax jobs received or sent. If [Admin Setup]>[Fax
Server Function]>[Environmental setting]>[Fax
Server Function] is set to [ON]. Journal Report for
Email/Internet Fax will be printed.
Fcode Box List Prints the list of Fcode boxes. Display condition: [Admin
Setup]>[Fax Server Function]>[Environmental
setting]>[Fax Server Function] is set to [OFF].