Muratec MFX-3091 User Manual

Windows Utilities
- 111 -
Useful Software
6
Network Extension
In Network Extension you can check the settings
on the machine and set the composition of the
options.
In order to use Network Extension, TCP/IP must
be activated.
Note
 This requires administrator rights.
Memo
 Network Extension is automatically installed when
installing a print driver through a TCP/IP network.
 The Network Extension is operated by linking with the
print driver. You cannot opt to only have Network
Extension installed.
 Network Extension only functions when the printer driver
is connected the standard TCP/IP port.
Launch the Utility
To use Network Extension, open the printer
properties screen.
1 Click on [Start] and then select
[Devices and Printers].
2 Right click on the printer icon and select
[Printer Properties].
Check Machine Settings
You can check the settings of the machine.
Memo
 If you use Network Extension in an environment that is not
supported, the [Option] tab may not be displayed.
1 Open the printer properties screen.
Reference
 "Launch the Utility" P. 111
2 Select the [Status] tab.
3 Click [Update].
4 Click [OK].
Reference
 Click [Web Setting] to automatically launch the
webpage. You can change machine settings on this
webpage screen. For details, refer to "Webpage" P. 100.
Set Options Automatically
You can get the composition of options of the
connected machine and automatically set the
print driver.
Memo
 You cannot configure this when using Network Extension in
unsupported environments.
 For Windows PCL.
1
Launch the printer properties screen.
Reference
 "Launch the Utility" P. 111
2 Select the [Device Options] tab.
3 Click on [Get Printer Settings].
4 Click [OK].

Muratec MFX-3091 Specifications

General

Brand	Muratec
Model	MFX-3091
Category	All in One Printer
Language	English