Muratec MFX-3091 User Manual

Security Functions
- 25 -
Faxing
2
 Security Functions
This section explains the security functions at fax transmission.
Memo
 To enter the [Admin Setup] menu, the administrator password is necessary. The default password is "aaaaaa".
Reference
 For details on how to specify a destination, refer to the User's Manual Basic.
Security Functions at
Transmission
The machine has the following three security
functions:
 ID check transmission
 Checking broadcast destination
 Pressing dial twice
These functions prevent you from transmitting
faxes to the wrong destination.
ID Check Transmission
This function checks and matches the last four
digits of the destination numbers with those
registered in the destination machine. If this
function is enabled, the machine will transmit
faxes only when they match.
Memo
 If the destination machine has no registered fax number,
the machine does not transmit the fax.
 ID check transmission is unavailable when you transmit
faxes manually.
 Configuration
1
Press the <SETTING> key.
2 Press the to select [Admin Setup]
and then press .
3 Enter the administrator password.
4 Select [Enter] and then press .
5 Press the to select [Fax Setup] and
then press .
6 Press the to select [Security
Function] and then press .
7 Check that [ID Check Tx] is selected
and then press .
8 Press the to select [ON] and then
press .
9 Press the until the top screen appears.
 Operation
1
Place your document with text face up in
the ADF or face down on the document
glass.
2 Press the <FAX/HOOK> key.
3 Check that [Fax] is selected and press
to open the fax start screen.
4 Check that [Add Destination] is
selected and then press .
5 Specify a destination.
6 Press .
Checking Broadcast Destination
When this function is enabled, a fax number
confirmation screen is displayed before
transmission starts. By factory default, this
function is enabled.
Memo
 Broadcast destination check function is available only
when multiple destinations are specified.
 When [Confirm Dial] is also enabled, it is done first.
 Broadcast destination check function is unavailable by
manual transmission.
 Configuration
1
Press the <SETTING> key.
2 Press the to select [Admin Setup]
and then press .
3 Enter the administrator password.
4 Select [Enter] and then press .
5 Press the to select [Fax Setup] and
then press .
6 Press the to select [Security
Function] and then press .
OK
OK
OK
OK
OK
OK
OK
OK
MONO
OK
OK
OK
OK

Muratec MFX-3091 Specifications

General

Brand	Muratec
Model	MFX-3091
Category	All in One Printer
Language	English