EasyManuals Logo

Muratec MFX-3091 User Manual

Muratec MFX-3091
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #116 background imageLoading...
Page #116 background image
Changing Network Settings From the Web Page
- 116 -
Opening the Web Page
Memo
Ensure to enable the protocol on which encryption is
applied in "Enabling Encryption" P. 115.
1 Launch a web browser.
2 Enter "https://your machine's IP
address" in the URL address bar and
then press the <Enter> key.
IPP Printing
IPP printing allows you to transmit your print job
data from your computer to the machine via the
Internet.
Enabling IPP Printing
IPP printing is disabled by factory default. To
perform IPP printing, enable IPP first.
1 Access the machine's web page and log
in as the administrator.
2 Select [Admin Setup].
3 Select [Network Manager] > [IPP].
4 Select [Enable].
5 Click [Send].
Setting Up Your Machine As an IPP
Printer (for Windows Only)
Add your machine to your computer as an IPP
printer.
1 Click [Start] and select [Devices and
Printers] > [Add a printer].
2 On the [Add Printer] wizard, select
[Add a network, wireless or
Bluetooth printer].
3 In the list of available printers, select
[The printer I am looking for is not
listed].
4 Select [Select a shared printer by
name].
5 Enter "http://your machine's IP address/
ipp" or "http://your machine's IP
address/ipp/lp" and then click [Next].
6 Click [Have Disk].
7 Insert the software DVD-ROM into the
computer.
8 Enter the following value in [Copy
from], and then click [Use].
- For PCL driver, "D:\Drivers\EN\PCL".
- For PS driver, "D:\Drivers\EN\PS".
Memo
In the above examples, the DVD-ROM drive is setup
as the D drive.
9 Select the NFL file and click [Open].
10 Click [OK].
11 Select a model and click [OK].
12 Click [Next].
13 Click [Finish].
14 Print the test page after installation is
complete.
Setting Up Your Machine As an IPP
Printer (for Mac OS X Only)
Add your machine to your computer as an IPP
printer.
1 Insert the software DVD-ROM into the
computer and install the driver.
Reference
"User's Manual Basic"
2 Select "System Preferences" from the
Apple menu.
3 Click [Print and Fax].
4 Click [ + ].
5 Click the [IP] tab.
6 From[Protocol], select [IPP (Internet
Printing Protocol)].
7 Enter the machine's IP address in
[Address].
8 Enter "ipp/Ip" in [Queue].
9 Click [Add].
10 Click [Continue].
11 Confirm that the machine is registered in
[Print and Fax].

Table of Contents

Other manuals for Muratec MFX-3091

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Muratec MFX-3091 and is the answer not in the manual?

Muratec MFX-3091 Specifications

General IconGeneral
BrandMuratec
ModelMFX-3091
CategoryAll in One Printer
LanguageEnglish

Related product manuals