Muratec MFX-3091 User Manual

Useful Functions
- 13 -
Copying
1
6 Press the or to specify the [Top]
margin for [Front] and then press the .
- To create a margin at the top of the output,
specify a positive value.
- To create a margin at the bottom of the output,
specify a negative value.
7 Press or to specify the [Left]
margin for [Front] and then press .
- To create a margin on the left side of the output,
specify a positive value.
- To create a margin on the right side of the output,
specify a negative value.
Memo
 You do not have to specify the [Back] margin when
copying on a single side.
8 Press the until the copy start screen
appears.
9 Enter the number of copies.
10 Press .
Memo
 [Margin] is disabled when all the values are set to [0].
 When Making Duplex Copies
When you make duplex copies with [Margin]
enabled, you must specify the [Back] margin.
1 Press the <COPY> key.
2 Place your document with text face up in
the ADF or face down on the document
glass.
3 Specify [Duplex Copy] as you want.
Reference
 For details, refer to the User's Manual Basic.
4 Press the to enter the [Change
settings] menu.
5 Press the to select [Margin] and then
press .
6 Press the to select [ON] and then
press .
7 Press the or to specify the [Top]
margin for [Front] and then press the .
- To create a margin at the top of the output,
specify a positive value.
- To create a margin at the bottom of the output,
specify a negative value.
8 Press or to specify the [Left]
margin for [Front] and then press
the .
- To create a margin on the left side of the output,
specify a positive value.
- To create a margin on the right side of the output,
specify a negative value.
9 Press or to specify the [Top]
margin for [Back] and then press the .
- To create a margin at the top of the output,
specify a negative value.
- To create a margin at the bottom of the output,
specify a positive value.
Memo
 Specify the same absolute value set in the [Top]
margin for both the [Front] and [Back] margins.
10 Press the or to specify the [Left]
margin for [Back] and then press .
- To create a margin on the left side of the output,
specify a negative value.
- To create a margin on the right side of the output,
specify a positive value.
Memo
 Specify the same absolute value set in the [Left]
margin for both the [Front] and [Back] margins.
11 Press the until the copy standby
screen appears.
12 Enter the number of copies.
13 Press .
Memo
 The position of margin is according to [Direction] of the
document.
If [Direction] of the document image is [Portrait], the
short edges are located in top and bottom edges, and long
edges are located in the right and left edges. If
[Direction] of the document image is [Landscape], the
long edges are located in right and left edges and the short
edges are located in the top and bottom edges.
 When you use the document glass, the continuous scan
mode is automatically enabled. Follow the instructions
displayed on the display screen.
 [Margin] is disabled when all the values are set to [0].
OK
MONO
OK
OK
OK
MONO

Muratec MFX-3091 Specifications

General

Brand	Muratec
Model	MFX-3091
Category	All in One Printer
Language	English