Using Drivers and Software
- 40 -
3 Click [Settings].
A window appears.
4 Click the scan button to change the
settings.
5 Click [OK].
6 If you start a scan job, click the scan
button.
If you want to finish the setting, click [Quit].
Advanced Mode
You can adjust in detail how a document is
scanned.
1 Follow the procedure for "Starting a Scan
Job (for Windows)" P. 39 through step 6.
2 Select [Advanced] from [Mode].
3 Change the settings if necessary.
4 Click [Scan] to start scanning.
If you want to finish the setting, click [Quit].
Reference
For details on how to change each setting, refer to the
online help.
Starting a Scan Job (for Mac OS X)
1
Press the <SCAN> key on the operator
panel.
2 Place your document with text face up in
the ADF or face down on the document
glass.
3 Press the to select [Remote PC] and
then press .
4 Start Adobe Photoshop CS3 on your
computer.
5 Select [Import] from [File] and then select
[MFX-3091 USB] or [MFX-3091
Network].
- When [MFX-3091 USB] is selected, proceed to the
step 9.
- When [MFX-3091 Network] is selected, the
network scan is the second or later time, proceed
to the step 9.
6 For the first network scan, the dialog box
indicating that the tool for selecting a
connection destination is started is
displayed. Then, click [OK].
7 On the dialog box of [Scan Settings],
select a connection destination to
register host information if necessary,
and then click [OK].
8 Select [Import] from [File] of Adobe
Photoshop CS3 and select [MFX-3091
Network].
The windows appears.
9 Click the scan button.
Scanning starts.
10 Select [Quit Photoshop] from
[Photoshop].
Changing Settings (for Macintosh)
You can adjust how the document is scanned by
changing the driver setting.
The following explains the setting items.
Simple Mode
You can change the settings of five registered
buttons.
1 Follow the procedure for "Starting a Scan
Job (for Mac OS X)" through step 8.
2 Select [Simple] from [Mode].
3 Click [Settings].
A window appears.
4 Click the scan button to change the
settings.
5 Click [OK].
6 If you start a scan job, click the scan
button.
If you want to finish the setting, click [Quit].
OK
To Next Page
Loading...
Need help?
General
