List of the Device Setting Menu Items
- 93 -
Configuring at the Operator Panel
5
Network Scale Normal When [Normal] is set: the machine works
effectively even when connected to a HUB
that has a spanning tree feature. However,
printer start up time gets longer when
computers are connected to two or three
small LANs.
When [Small] is set: computers can cover
from two or three small LANs to a large-
LAN, but it may not work effectively when
it is connected to a HUB with a spanning
tree feature.
HUB Link Setting Auto Negoti-
ate
Sets the hub linking method. Usually,
select [Auto Negotiate].
TCP ACK Type1 Sets a type of TCP Acknowledgment.
When Type1 is set, the printer replies to
every packet.
When Type2 is set, the printer replies to
plural packets in a mass.
When printing comes to take time by the
setting of the hub, choosing Type2 may
improve the matter.
Usually, setting Type1 hasn't any problem.
Network PS-Protocol RAW Sets a PS-protocol.
Factory
Defaults
Execute
The settings of the network, mail server, LDAP
server, and secure protocol server are returned
to the default settings.
Mail
Server
Setup
SMTP Server (NULL) Sets the IP address or host name for the
SMTP server.
SMTP Port 25 Sets the port number. Usually, the default
is used.
Available range: 1 to 65535
SMTP Encryption None Selects an encryption method in the SMTP
communication.
Receive Setting Disable Select a protocol to use for the E-mail
reception.
POP3 Server (NULL) Sets the IP address or host name for the
POP3 server.
POP3 Port 110 Sets the port number prepared by the
POP3 on the POP3 server.
Available range: 1 to 65535.
POP Encryption None Selects an encryption method or e-mail
transmission.
Authentication method None Sets the certification for e-mail transmis-
sion.
SMTP User ID (NULL) Sets a log-in name used for SMTP certifi-
cation.
SMTP Password (NULL) Sets a log-in password used for SMTP cer-
tification.
POP User ID (NULL) Sets a log-in name onto the server used
for POP certification or for printing
attached files of received e-mails.
POP Password (NULL) Sets a lo-in password onto the server used
for POP certification or for printing
attached files of received e-mails.
Item
Factory
Default
Description
To Next Page
Loading...
Need help?
General
