Nabco Opus Control - Page 13

13 of 35
www.NabcoEntrances.com OpusControlWiringandProgrammingInstallaonManual
Rev. 3-9-18 P/N C-00139
Optional Setting
Parameter Range Default Description
DN 1309
Latch Check (LCHK)
Lockout Angle
Back Check (BCHK)
Lockout Angle
Available Angle
Con nuous Safety
Available Angle
for Low Energy
Door Mount
Approach Side
Sensor
Available Angle Safety
with lockout
Available Angle Safety
with Lockout
SAFETY WITH LOCKOUT AREASLOCKOUT PARAMETERS
Stop Force Adjustment 0 - 7 3 Determines how the door reacts to a connuous safety signal:
Slow Open, Stop, or Slow Close
Anti-Slam Open? Yes No Choose Yes if the door slams open
No
Sim Pair Setting Single Door Single Door Select type of Door
Normal Sim Pair If selected; before returning to last screen, opon to copy
sengs to other Control is given.
Double Egress The Acvaon signal (only) is shared between doors. All other
signals are independent.
Overlap Sim Pair
► 
► 

1. Have acvaon signals connected to it
2. Be set to “Overlap Sim Pair”
► 
► 
► 

DN 1558
Open fi rst,
Latch check is wide
Overlap Sim Pair
Opus Se ngs
Normal Sim Pair
Ac va on No Ac va on
Connec on