NAiS FP1 User Manual

■ Writing a program to the memory (EPROM) with NPST-GR Software and a commercially
available ROM programmer
[Program with NPST-GR Software → Commercially available ROM programmer’s internal memory → memory
(EPROM)]
Procedure:
1 Transfer the program from the personal computer to
the commercially available ROM programmer’s
internal memory with NPST-GR Software.
2 Attach the memory (EPROM) to the ROM
programmer, and write the program.
Necessary tools
• Computer: Commercially available personal computer
(IBM PC-AT or 100% compatible machine)
System required:
- Main memory: 550 KB or more free
- EMS: 800 KB or more free
- Hard disk space: 2 MB or more
- Operating System: MS-DOS Ver. 3.30 or later
- Video mode (Display mode): EGA or VGA
• NPST-GR Software Ver. 3: AFP266538
Note:
• RS232C cable:
Select in accordance with the specifications of the
commercially available ROM programmer.
• Commercially available ROM programmer:
We recommend Aval Data Corporation’s PECKER 11.
• Socket adapter for FP ROM Writer: AFP1810
• Memory (EPROM): AFP1201
• The .EXE files are compressed in the
system disks. When installing the NPST-
GR, you will have to expand them.
19
1-4. Programming Tools
RS232C interface
RS232C cable
Rear view
NPST-GR Software
Commercially available
personal computer
(IBM PC-AT or 100% compatible)
Socket adapter
for FP ROM Writer
Memory
(EPROM)
F
P
1
M
E
M
O
R
Y
U
N
I
T
MA
T
US
IT
A
E
LE
CTR
IC W
OR
KS
. LTD
MA
DE
IN JAP
AN
Commercially available
ROM programmer

NAiS FP1 Specifications

General

Brand	NAiS
Model	FP1
Category	Controller
Language	English