NARDA FieldMan User Manual

8.2 FIELD STRENGTH
Narda FieldMan 65
Using the marker
The measurement results can be evaluated via the marker.
Switch on the marker:
1. Press SK3 to stop the display (HOLD).
↳ SK1 now shows the marker symbol.
2. Press SK1 to show the marker.
↳ A circle shows the marker position in the diagram (1), the time and measured
value are indicated on the right above the diagram.
3. Use the ◄ ► keys to move the marker.
4. Press SK1 to turn the marker off again.
If the display was stopped via HOLD, the measurement continues in the background.
As soon as the display is restarted, there is therefore continuous recording and
updating of the time curve display.
Using the peak marker
The peak values can be evaluated via the peak marker.
⇒ For information on the peak marker, see 10.7 Peak marker on page 106.
1

NARDA FieldMan Specifications

General

Brand	NARDA
Model	FieldMan
Category	Measuring Instruments
Language	English