8 Operating modes
74 FieldMan Narda
8.4.3 Numerical display
Two fields are available for numerical display:
• Main field: Displays current or static measured values depending on the selected
result type and detection type
• Supplementary field: Always displays static values
Detector
A selection is only available for the BFD-400-1 probe. For all other probes, RMS is spec-
ified.
Select a detector:
⇒ MEASUREMENT SETTINGS: Select a detector under Detector.
Detector Description Availability
RMS All measured values are recorded and displayed
as RMS values.
All probes
Peak All measured values are recorded and displayed
as peak values.
BFD-400-1
probe only
Result type
The result types are always displayed in the supplementary field. To display them in the
main field, the result type must be selected in the selection field using the cross key.
Select a result type:
⇒ Press the ◄ ► keys repeatedly until the desired result type is displayed.
↳ The selection option depends on the selected detector:
Detector Selection via
cross key
Main field Supplementary
field
Top Bottom
RMS
(all probes)
ACTUAL ACTUAL X Y Z MAX, MIN,
MAXAVG, AVG
MINIMUM MIN ACTUAL
MAXIMUM MAX ACTUAL
AVERAGE AVG ACTUAL
MAX AVERAGE MAXAVG ACTUAL
To Next Page
Loading...
