8.4 TIMER LOGGING
Narda FieldMan 75
Peak
(BFD-400-1
only)
ACTUAL
ACTUAL X Y Z
MAX, MIN
MINIMUM
MIN ACTUAL
MAXIMUM
MAX ACTUAL
The display in detail
Fig. 8: Numerical display in the TIMER LOGGING operating mode
1 Result type selection field
2 Selected detector (selection in MEASUREMENT SETTINGS)
3 Main field:
– Left: Result type ACTUAL.
The current isotropic value and the three axes are displayed.
– Right: Other result type, here as an example AVERAGE.
The selected result type is displayed and ACTUAL is always displayed as well
4 Supplementary field
The measured values are always displayed, regardless of whether data is being
recorded.
Detector Selection via
cross key
Main field Supplementary
field
Top Bottom
4
1
2
3
To Next Page
Loading...
