8.4 TIMER LOGGING
Narda FieldMan 77
The display in detail
⇒ To call up the time curve display in the DATA LOGGER, see 9 DATA LOGGER on
page 91.
Fig. 10: Graphic display in the TIMER LOGGING operating mode after calling it up in the DATA
LOGGER
1 Unit
2 Time and ACT measured value with marker switched on
3 Graphical display of the current values
4 Measuring duration in the format hh:mm:ss
Using the marker
1. Press SK1 to turn on the marker.
↳ A circle shows the marker position in the diagram, the time and measured value
are indicated on the right above the diagram.
2. Use the ◄ ► keys to move the marker.
3. Press SK1 to turn the marker off again.
Using the peak marker
The peak values can be evaluated via the peak marker.
⇒ For information on the peak marker, see 10.7 Peak marker on page 106.
1 2
3
4
To Next Page
Loading...
