NARDA FieldMan User Manual

8 Operating modes
88 FieldMan Narda
Using the marker
✓ The display is in HOLD mode.
1. Press SK1 to turn on the marker.
2. Use the ◄ ► keys to move the marker to the desired position on the measuring
curve.
3. Press SK1 to turn the default marker off again.
Fig. 16: Marker in the SHAPED TIME DOMAIN operating mode
1 SK1: Switch marker on/off
2 Movement symbols for standard markers
3 Measured values at the marker position
4 Marker position
5 SK4: Switch peak marker on/off
If the display was stopped via Hold, the measurement continues in the background. As
soon as the display is restarted, there is therefore continuous recording and updating
of the time curve display.
Using the peak marker
The peak values can be evaluated via the peak marker.
⇒ For information on the peak marker, see 10.7 Peak marker on page 106.
1
2
5
3
4

NARDA FieldMan Specifications

General

Brand	NARDA
Model	FieldMan
Category	Measuring Instruments
Language	English