National Instruments VirtualBench - Front Panel Features; Figure 4-1. Front Panel of Virtualbench-Logger

Chapter 4 VirtualBench-Logger
Getting Started with VirtualBench 4-2 www.ni.com
Front Panel Features
This section explains the features of the VirtualBench-Logger front panel,
shown in Figure 4-1.
Figure 4-1.
Front Panel of VirtualBench-Logger
The front panel of VirtualBench-Logger has the following features:
• Strip Chart Display—Displays the logged data.
• Y Axis Select Controls—Selects which channel’s Y scale to display
on either the left or right Y-axis of the strip chart display.
• Status Display—Shows the current time, start time, and stop time of
the current data acquisition.
• Channel Select Control—Selects which channels to display on the
strip chart display. You can use the Labels/Values radio buttons below
the channel select control to switch between the channel labels and the
Y Axis
Select Control
Status
Display
Strip Chart
Display
Acquire Data Controls
Legend
Control
Channel
Select