© National Instruments Corporation 9-1 Getting Started with VirtualBench
9
VirtualBench-Arb and
VirtualBench-Waveform Editor
This chapter explains the VirtualBench-Arb front panel features, the
Waveform Editor front panel features, and how to generate a waveform.
Launching VirtualBench-Arb
To launch VirtualBench-Arb, use the Start button in the Windows taskbar
to select Programs»VirtualBench»VirtualBench-Arb.
Waveform Generator Front Panel Features
This section explains the features of the VirtualBench-Arb Waveform
Generator front panel, as shown in Figure 9-1.
Figure 9-1.
Front Panel of VirtualBench-Arb Waveform Generator
Update Rate Mode
Waveform Name/Load Waveform Gain
Play/Stop