© National Instruments Corporation 10-1 Getting Started with VirtualBench
10
VirtualBench-Device Calibrator
This chapter explains the VirtualBench-Device Calibrator front panel
features and how to calibrate a DAQ device.
Launching VirtualBench-Device Calibrator
To launch the VirtualBench-Device Calibrator, use the Start button in the
Windows taskbar to select Programs»VirtualBench»VirtualBench Cal.
Front Panel Features
This section explains the front panel features of the
VirtualBench-Device Calibrator, as shown in Figure 10-1.
Figure 10-1.
Front Panel of VirtualBench-Device Calibrator
Device List
Calibrate Button
To Next Page
Loading...
