© National Instruments Corporation 8-1 Getting Started with VirtualBench
8
VirtualBench-Switch
This chapter explains the VirtualBench-Switch front panel features and
how to make signal connections.
Launching VirtualBench-Switch
To launch VirtualBench-Switch, use the Start button in the Windows
taskbar to select Programs»VirtualBench»VirtualBench-Switch.
Note
VirtualBench-Switch is for use only with IVI instruments.
Front Panel Features
This section explains the features of the VirtualBench-Switch front panel,
as shown in Figure 8-1.
To Next Page
Loading...
