6. Scroll down the Result list and double-click EK-TL A Kit to load this drum kit into Group
A.
2.1.2 Loading a Drum Kit from the Factory Library using the Controller
On your controller, do the following:
1. Press button A on the left of your controller to select the first Group slot. This is where
you are going to load our drum kit. Button A should be lit in blue to indicate that it is
selected.
2. Press the BROWSE button at the top left of your controller.
The BROWSE button lights up. In the left display, you now are presented with a selection
of choices.
3. Press Button 1 or 2 above the displays to select GROUPS.
Now you can browse Groups only on the right display.
First Steps
Loading a Drum Kit from the Factory Library
MASCHINE - Getting Started - 23
To Next Page
Loading...
