3.8.1 Loading and Playing a Stem File
Prerequisites
We assume here you already have imported and analyzed your Stem Files in your Track Collec-
tion and your TRAKTOR KONTROL S5 is in the following state:
▪ Decks A and B are focused and stopped.
▪ Channel faders A is set to the maximum level.
▪ Channel fader B are set to the minimum level.
▪ The Crossfader is set to center position.
Loading a Stem File
To load a Stem File into the left Deck A:
1. Press the
BROWSE encoder to open the Browser.
2. Rotate the
BROWSE encoder to navigate to TRACK COLLECTION > All Stems >.
Using Your S5—Getting Advanced
Mixing Stem Files using Stem Decks
TRAKTOR KONTROL S5 - Manual - 119
To Next Page
Loading...
