By pressing the Loop encoder while Freeze mode is active this will enable the Slicer mode. The
slices in the display and pad color change from blue to green.
REMIX Mode
In Remix mode, the pads trigger the content of corresponding Remix Cells - the tracks, loops
or Samples defined in the Remix Set. After loading a Remix Set, the pads take on the Sample
Cells' color. By pressing Display buttons 3 and 4 you can scroll through the rows of Remix
Cells in steps of two.
4.2.5 Touch Strip
Utilizing the Touch Strip, you can:
▪ Seek/navigate within the track.
▪ Tempo bend (nudge) for aligning beats.
▪ Create a scratch effect
▪ Holding the track or Samples.
▪ Backspinning the track or the Samples.
Above the Touch Strip, a number of LEDs provide visual feedback for the actions taken on the
touch strip.
Phase Meter
For Track Decks, Stem Decks and Remix Decks, the LEDs work as a Beat Phase Meter, showing
the focused Deck's beat phase offset from the
MASTER Deck. This is the same meter as dis-
played in TRAKTOR's Deck.
Direction of Scratching
If you didn't learn scratching with LPs and turntables, you may find inversing the Touch Strip's
direction more intuitive. If you select this option, swiping to the right on the Touch Strip will
move forward in the track's waveform.
►
Inverse the directional response by unchecking the
Invert checkbox in TRAKTOR's S5
preferences: Preferences> Traktor Kontrol S5>Touchstrip>Scratch Sensitivity.
Hardware Reference
The Deck
TRAKTOR KONTROL S5 - Manual - 159
To Next Page
Loading...
