2.3 Mixing In a Second Track
Now that you have learned how to load and play a track from the S5, lets mix in a second
track on Deck B. By doing so, you will learn a few mixing basics which are essential for every
DJ: how to cue tracks, synchronize tracks, start the playback at the right position, and mix the
tracks together using the Crossfader.
Prerequisites
We assume here that your S5 is in the following state:
▪ The track Techno 1 is loaded into Deck A. The track is playing and audible.
▪ The right Deck is focused on Track Deck B.
▪ The Crossfader is all way to the left.
▪ On channel B, the channel fader is set to minimum, the EQ knobs and the GAIN knob are
set to the center position.
Using Your S5—Getting Started
Mixing In a Second Track
TRAKTOR KONTROL S5 - Manual - 30
To Next Page
Loading...
Need help?
General
Weight and Dimensions
