Native Instruments traktor kontrol s5 - Moving a Loop


Playback continues as normal.
By pushing the Loop encoder when there is no Loop active, you activate looping: the
next Loop in the track will be activated.
To deactivate the Loop:
►
Press the
LOOP encoder again.

Playback continues as normal.
By pushing the LOOP encoder when there is no Loop active, you activate looping: the
next Loop in the track will be activated.
3.2.2 Moving a Loop
With a loop size selected, you can move the Loop selection to another position within your
track.
To move the Loop:
►
Press the Deck's
SHIFT button and turn the LOOP encoder. The loop selection will be
moved through the track on the fly and looping continues at the respective position.
Using Your S5—Getting Advanced
Playing with Loops in HOTCUE Mode
TRAKTOR KONTROL S5 - Manual - 82