Note that when the FLUX button is engaged, you cannot make use of Slicer mode on the
pads.
Perform a backspin effect for two Beats using FLUX mode
If the option Touch to Scratch is enabled in the TRAKTOR Preferences you can perform a
backspin effect for two beats by using FLUX mode:
1. Press the
FLUX button to enable FLUX mode.
2. Hold the
SHIFT button, and swipe quickly from the very right to the very left on the Touch
Strip.
3. Two beats later, release the
SHIFT button.
The Backspin will stop and normal playback will resume right on the beat you desire.
3.5 Remixing with Remix Decks
In the previous tutorials you learned how to mix using the Track Decks and how to work with
some advanced functionalities of the S5. In this tutorial, you will learn how to use the Remix
Decks. With the Remix Decks you can play and perform with pre-defined Remix Sets as well as
create your own Remix Sets by capturing samples of tracks.
Prerequisites
▪ Deck C is enabled.
▪ Channel C fader is set to minimum.
▪ The EQ knobs of channel C are set to center position.
▪ The
MAIN knob is set to an adequate output level.
▪ The Crossfader is all the way to the left.
Using Your S5—Getting Advanced
Remixing with Remix Decks
TRAKTOR KONTROL S5 - Manual - 94
To Next Page
Need help?
General
Weight and Dimensions
