Native Instruments traktor kontrol s5 - Opening the Control Panel; Audio Settings Panel

7.2.1 Opening the Control Panel
You can open the Control Panel in various ways:
►
From within TRAKTOR: Go to Preferences > Audio Setup and click the
Settings button,
located at the right of the
Latency slider and display:
If you cannot find the Control Panel, the driver is most likely not installed at all. In this case,
please re-install the latest version of TRAKTOR and make sure the S5 driver is selected for in-
stallation.
7.2.2 Audio Settings Panel
The
Audio Settings page allows you to adjust the settings of the audio interface.
The S5 Audio Interface and Control Panel
Settings on Windows: The Control Panel
TRAKTOR KONTROL S5 - Manual - 197