Native Instruments traktor kontrol s5 - Storing a Loop

The step size you move the selection by is the same as the loop size, which is shown in the
display.
Turning the LOOP encoder when there is no Loop active lets you jump backward/forward
through the track by the same step size.
3.2.3 Storing a Loop
In a previous tutorial, you learned how to store Cue Points, which is as simple as pressing an
unlit pad. Storing Loops works in a similar way. Let's say you have stored two HotCues in the
track currently playing:
1. Press the Loop encoder to engage a Loop.
2. To store the active Loop, press an unlit pad. The pad lights up green.
The display will show a green marker indicating the Loop. The marker also shows the number
of the corresponding pad.

You have just stored a Loop that you can return to by pressing the same pad again.
Deleting a Loop
To delete a Loop:
►
Press the Deck's
SHIFT button and the pad assigned to the Loop you want to delete.
Using Your S5—Getting Advanced
Playing with Loops in HOTCUE Mode
TRAKTOR KONTROL S5 - Manual - 83