Additional Information about Performing with Stem Decks
Besides the aforementioned actions for performing on Stem Decks you can also make use of
setting Hotcues, applying Loops, using FREEZE mode, using FLUX mode, and using the Touch
Strip as you learned in previous tutorials.
It is not possible to capture Samples from Stem Files.
3.8.4 Adding another Stem File to the Mix
Equipped with the fundamental knowledge about performing on a Stem Deck you will now
learn to mix Stem File on Deck A into another Stem File on Deck B.
3.8.4.1 Loading a Stem File into Deck B
To load a Stem File into the right Deck B:
1. Press the
BROWSE encoder to open the Browser.
2. Turn the
BROWSE encoder to navigate to TRACK COLLECTION > All Stems >.
Using Your S5—Getting Advanced
Mixing Stem Files using Stem Decks
TRAKTOR KONTROL S5 - Manual - 129
To Next Page
Loading...
