Native Instruments traktor kontrol s5 - Display Area and Controls

(3) Mode Select Buttons: The Deck can operate in several modes which can be easily enabled
by the Mode Select Buttons. For more information, refer to section
4.2.3, Mode Select But-
tons
.
(4) Pads: The Deck comes with a set of eight pads. Depending on the mode selected via the
Mode Select buttons, these pads are assigned different functions. For more information, refer
to section 4.2.4, Pads.
(5) Touch Strip: The Touch Strip reflects the behavior of Jog Wheels of traditional DJ control-
lers. For more information, refer to section
4.2.5, Touch Strip.
(6) TRANSPORT controls: The
TRANSPORT controls control playback of the Deck. It also pro-
vides the
SHIFT button to access secondary functions of other buttons. For more information,
refer to section
4.2.6, Transport Controls.
(7) FLUX button: The
FLUX button enables Flux Mode for the focused Deck. For more informa-
tion, refer to section
4.2.7, FLUX Button.
(8) Loop encoder: Primarily, the Loop encoder is dedicated to looping functions but it also for
determining values in other preferences. For more information, refer to section
4.2.8, Loop
Encoder
.
(9) DECK button: The
DECK Button allows you to switch the focus (and controls) between the
primary and secondary Decks in a Deck section. For more information, refer to section
4.2.9,
DECK Button
.
4.2.1 Display Area and Controls
On the S5's graphic color displays, some functionality is dynamically shown or hidden by
means of the Display buttons adjacent to the display. The following image gives a detailed
overview of the Display area and its controls, as well as a table with links referring to sections
with further information.
Hardware Reference
The Deck
TRAKTOR KONTROL S5 - Manual - 146