Native Instruments traktor kontrol s5 - Playing with Loops in HOTCUE Mode

3.2 Playing with Loops in HOTCUE Mode
Now that we've covered all basic mixing techniques and how to use the Touch Strip, we will
focus on S5s looping facilities in HOTCUE mode.
Prerequisites
We assume here that the S5 is in the following state:
▪ The track Techno 1 is loaded on Deck A and stopped.
▪ The Crossfader is all the way to the left.
▪ The channel fader A is raised to the top.
▪ The
MAIN knob has an adequate level.
3.2.1 Engaging and Disengaging a Loop
Lets add a loop to the track on Deck A.
To engage a loop on a Deck:
1. Press the Deck's
PLAY button to start playback.
2. Press the Deck's
HOTCUE button to enable HOTCUE mode.
3. Press the Deck's LOOP encoder. The LED next to the LOOP encoder flashes to indicate
the loop is activated.
Using Your S5—Getting Advanced
Playing with Loops in HOTCUE Mode
TRAKTOR KONTROL S5 - Manual - 79