Native Instruments traktor kontrol s5 - View Button; Performance Mode Button; BROWSE Controls

4.2.1.4 View Button
The View button switches between view types in the display.
View Button
It switches between view types:
▪ Single View: Only the focused Deck is displayed.
▪ Split View: Both Decks are displayed; the focused Deck is visualized by a big waveform and
detailed information, while the unfocused Deck is reduced to a small waveform, showing
markers and a playhead.
Whenever you open a pop-up from a Deck view (e.g. FX Selection Menu, Browser, BPM,
or
KEY) the View button starts flashing. Press the View button to close the pop-up.
4.2.1.5 Performance Mode Button
The Performance Mode buttons marked with left and right arrows let you cycle through the Per-
formance modes
FILTER, PITCH, FX SEND and, if enabled, MIDI.
Left Performance Mode Button
4.2.2 BROWSE Controls
BROWSE Encoder
The
BROWSE encoder lets you access the Browser and navigate through your track collection
and playlists.
Hardware Reference
The Deck
TRAKTOR KONTROL S5 - Manual - 153