The EQ and FILTER knobs on channel B.
Prerequisites
We assume here that you have already followed the instructions in the previous tutorials and
the S5 is in the following state:
▪ The track Techno 1 is loaded on Deck A. The track is playing and audible.
▪ The track Techno 2 is loaded on Deck B. The track is playing and audible.
▪ Both tracks are synched.
▪ The Crossfader is all the way to the left.
▪ On channel B, the channel fader is set to minimum, the EQ knobs, the
GAIN knob, and the
Filter knob are set to center position.
Using Your S5—Getting Started
Mixing In a Second Track
TRAKTOR KONTROL S5 - Manual - 39
To Next Page
Loading...
