Need help?Do you have a question about the Native Instruments Traktor Kontrol Z2 and is the answer not in the manual?
General| Frequency range | 20 - 20000 Hz |
|---|---|
| Channels quantity | 6 channels |
| Supported sample rates | 48 kHz |
| Digital sound processing | 24 bit |
| AUX in | Yes |
| XLR out | 2 |
| AUX out ports | 1 |
| Headphone connectivity | 3.5 mm/6.35 mm |
| Product color | Black |
| USB connector type | USB Type-A, USB Type-B |
| AC input voltage | 115 - 230 V |
| Power consumption | 750 mA |
| AC input frequency | 50 - 60 Hz |
| Minimum storage drive space | 1024 MB |
| Mac operating systems supported | Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina |
| Windows operating systems supported | Windows 10 |
Explains formatting, icons, and typographical conventions used in the manual.
Lists related guides and manuals for the Z2 and TRAKTOR software.
Specifies the voltage and frequency requirements for the Z2's power supply.
Details the minimum computer hardware and OS specifications for TRAKTOR.
Lists audio inputs and outputs available on the Z2.
Step-by-step instructions for setting up the Z2 as a standalone mixer.
Instructions for connecting microphones, external devices, and using EQs/Filters.
Overview of essential operations when using the Z2 with TRAKTOR software.
Overview of the chapter detailing each component of the Z2.
Details all inputs, outputs, USB ports, and power connections on the rear panel.
Describes the headphone jacks, crossfader reverse switch, and curve knob.
Controls for microphone, auxiliary inputs, and TRAKTOR's Macro FX.
Controls for deck volume, looping, beatjumping, and sample triggering.
Buttons for TRAKTOR mode, gain, EQ, filters, and browsing/loading tracks.
Information on status indicators, Snap, Quantize, Settings, and SHIFT buttons.
Controls for headphone monitoring, master/booth output levels, and crossfader.
To Next Page
