Native Instruments Traktor Kontrol Z2 User Manual

5.3.3 XF CURVE Knob
The XF CURVE knob on the front panel.
You can change the type of crossfader curve with this knob. Turned all the way left, the curve
gives a smooth blend between the channels. Turned all the way right, it gives you an on/off
"cut" style blend. This works the same way both for the Z2 in Direct mode and for the software
in TRAKTOR mode.
5.4 Top Panel
The vast majority of the time you spend with the Z2 will involve using the top panel controls.
The Z2's hybrid technology lets you use it as a stand-alone DJ mixer (Direct mode) and as
TRAKTOR controller (TRAKTOR mode). You can even mix one channel in Direct mode, and at
the same time you are mixing the other channel in TRAKTOR mode. In addition, you can com-
bine traditional vinyl (or CD) mixing with TRAKTOR Timecode mixing.
The following section describes all of the controls and displays on the Z2's top panel — learn-
ing these functions is the key to mastering the Z2!
TRAKTOR KONTROL Z2 Hardware Reference
Front Panel
TRAKTOR KONTROL Z2 - Manual - 39

Native Instruments Traktor Kontrol Z2 Specifications

General

Frequency range	20 - 20000 Hz
Channels quantity	6 channels
Supported sample rates	48 kHz
Digital sound processing	24 bit
AUX in	Yes
XLR out	2
AUX out ports	1
Headphone connectivity	3.5 mm/6.35 mm
Product color	Black
USB connector type	USB Type-A, USB Type-B
AC input voltage	115 - 230 V
Power consumption	750 mA
AC input frequency	50 - 60 Hz
Minimum storage drive space	1024 MB
Mac operating systems supported	Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina
Windows operating systems supported	Windows 10