3 Using the Z2 as a Stand-alone DJ Mixer (Direct Mode)
Although the Z2 is designed to be a fully integrated mixer, controller, and audio interface for
the TRAKTOR software, you can also use it as a fully-fledged two-channel stand-alone mixer,
without any computer connections. This gives you a great deal of flexibility, allowing you to
play in situations where it might not be possible (or desirable) to use a computer. In the follow-
ing section, we will describe some typical ways to use the Z2 without a computer connection.
In other words, right out of the box — with no software installation necessary — the Z2 is a
solid, high-performing DJ mixer.
3.1 Connectivity
For a complete description of inputs and outputs, please read the Hardware Reference chapter
(↑5, TRAKTOR KONTROL Z2 Hardware Reference). The following is a compact list of the Z2's
audio, digital, and power connections.
Audio Inputs
The Z2 has a complete set of standard audio inputs, giving you a great deal of flexibility:
▪ RCA phono inputs, one stereo pair per channel
▪ RCA line-level inputs (for connecting a CD player, for example), one stereo pair per chan-
nel
▪ Auxiliary input (from another audio device, such as an MP3 player)
▪ Microphone input
▪ Two ground screws for turntable grounding
Audio Outputs
▪ Two stereo headphone output jacks: one 1/4-inch jack and one 1/8-inch jack (on front
panel)
▪ A stereo pair of Quarter-inch jacks (balanced) for booth outputs
Using the Z2 as a Stand-alone DJ Mixer (Direct Mode)
Connectivity
TRAKTOR KONTROL Z2 - Manual - 13
To Next Page
Loading...
Need help?
General
