5 TRAKTOR KONTROL Z2 Hardware Reference
5.1 Introduction
This chapter details the use of each element on your TRAKTOR KONTROL Z2. Like any impor-
tant piece of audio hardware, it is a good idea to get familiar with the Z2 in order to make the
most of this highly versatile mixer and controller. Although the Z2 is very intuitive and easy to
use, many of its controls have multiple functions — especially with regards to controlling the
TRAKTOR software.
After a quick introduction to the main areas on your Z2, we will give you a thorough description
of each control, input, and output element on your Z2.
In this chapter, we refer to the Z2 in TRAKTOR mode, unless noted. In other words, we as-
sume that the Z2 is connected to a computer with the TRAKTOR software installed and run-
ning. For specific Direct mode operation, please see the section ↑3, Using the Z2 as a Stand-
alone DJ Mixer (Direct Mode).
Nearly every action you carry out on your Z2 is instantly mirrored in TRAKTOR when you
are using the Z2 with the TRAKTOR software. Although the Z2 is an excellent stand-alone
mixer, the full feature set comes to life when both software and hardware are used togeth-
er. For an in-depth explanation of all features provided by the TRAKTOR software, please
refer to the TRAKTOR Manual.
A Word about TRAKTOR…
If you are not already a proficient TRAKTOR user, you might want to refer to the TRAKTOR
Manual as you read this chapter. If you are completely new to TRAKTOR, it is a good idea to
work through some of the tutorials in the TRAKTOR Manual, or the TRAKTOR Getting Started
guide — they can be an enjoyable way to quickly learn how to use TRAKTOR effectively!
We assume that you have a basic understanding of many TRAKTOR concepts such as Decks,
Deck Flavors and configurations, looping, cue points, and so on. In addition, you should under-
stand how TRAKTOR's mixer and effects (FX) work.
TRAKTOR KONTROL Z2 Hardware Reference
Introduction
TRAKTOR KONTROL Z2 - Manual - 31
To Next Page
Loading...
Need help?
General
