Native Instruments Traktor Kontrol Z2 User Manual

ACTION RESULT
Remix Deck (Primary Mode)
SHIFT + Press
If no Sample is loaded in the Slot, this will load the
currently selected entry in the browser
If a Sample is loaded into the slot and playing, this
will stop the playing.
If a Sample is loaded into the Sample Slot and stop-
ped, this will unload the Slot.
Remix Deck (Secondary Mode)
Press
Retriggers the selected Sample Slot
Remix Deck (Secondary Mode)
SHIFT + Press
If no Sample is loaded in the Sample Slot, this will
load the currently selected entry in the browser.
If a Sample is loaded into the Sample Slot, this will
stop it.
5.4.6
FLUX Buttons
The left FLUX (TAP) button on the top panel.
To toggle back and forth between Flux mode and normal mode, press the FLUX (TAP) button
on either channel. By pressing SHIFT at the same time, the FLUX (TAP) buttons blink at the
current Deck's tempo. See ↑4.4, Flux Mode for further information about Flux mode.
Tap Tempo
To tap the tempo of Deck A or B:
►
Press and hold SHIFT and then tap the channel's FLUX (TAP) button at the desired tem-
po.
TRAKTOR KONTROL Z2 Hardware Reference
Top Panel
TRAKTOR KONTROL Z2 - Manual - 49

Native Instruments Traktor Kontrol Z2 Specifications

General

Frequency range	20 - 20000 Hz
Channels quantity	6 channels
Supported sample rates	48 kHz
Digital sound processing	24 bit
AUX in	Yes
XLR out	2
AUX out ports	1
Headphone connectivity	3.5 mm/6.35 mm
Product color	Black
USB connector type	USB Type-A, USB Type-B
AC input voltage	115 - 230 V
Power consumption	750 mA
AC input frequency	50 - 60 Hz
Minimum storage drive space	1024 MB
Mac operating systems supported	Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina
Windows operating systems supported	Windows 10