Native Instruments Traktor Kontrol Z2 User Manual

▪ Number of Clients: displays the number of clients connected to the interface. Multiple
ASIO applications are counted separately, WDM and WASAPI increase the number by
one, no matter how many WDM/WASAPI applications play audio.
▪ USB Data Errors: counts USB data errors. Poor quality or long cables as well as irradiation
can be the source of data errors on the USB bus.
▪ Reset: A click on this button resets the error count.
▪ Driver Version: See the currently installed driver version here.
▪ Firmware Version: See the currently installed firmware version here.
▪ Troubleshooting Guide: Click Show to open the Troubleshooting Guide.
6.3 Cue/Sample LED Color Illumination
The illumination of the Cue/Sample Trigger buttons depends on the underlying Deck Flavor:
For Track Decks
The Cue/Sample Trigger buttons light up according to the following scheme for Track Decks:
▪ Light Blue: HotCue
▪ Green: Loop
▪ Orange: Fade-In and Fade-Out Markers
▪ White: Grid Marker
For Remix Decks
For Remix Decks, the LEDs light up according to the color and playback state of the associated
active cell in the Remix Deck.
Appendix
Cue/Sample LED Color Illumination
TRAKTOR KONTROL Z2 - Manual - 75

Native Instruments Traktor Kontrol Z2 Specifications

General

Frequency range	20 - 20000 Hz
Channels quantity	6 channels
Supported sample rates	48 kHz
Digital sound processing	24 bit
AUX in	Yes
XLR out	2
AUX out ports	1
Headphone connectivity	3.5 mm/6.35 mm
Product color	Black
USB connector type	USB Type-A, USB Type-B
AC input voltage	115 - 230 V
Power consumption	750 mA
AC input frequency	50 - 60 Hz
Minimum storage drive space	1024 MB
Mac operating systems supported	Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina
Windows operating systems supported	Windows 10