Native Instruments Traktor Kontrol Z2

5.4.10 EQ (HI, MID, LOW) and FILTER Controls
A channel's EQ (HI, MID, and LOW) and FILTER knobs on the top panel.
Just below the GAIN knob at the top of each of the Z2's channels, you will see three EQ knobs
(HI, MID, and LOW) and a FILTER knob. The Z2's high-quality filter and EQ section gives you
a fast and easy way to adjust for frequency imbalances, but also gives you quick access to fil-
ter and EQ effects.
You can "drop" a filter (or an EQ band) in or out of the mix by using the SHIFT button. See
also ↑4.5, Filter and EQ Knob Snap.
TRAKTOR KONTROL Z2 Hardware Reference
Top Panel
TRAKTOR KONTROL Z2 - Manual - 52